Skop of use of air elektrik pemanas

Skop of use of air elektrik pemanas

FAG induction heaters all have automatic demagnetization function, which uses metal to generate eddy currents in an alternating magnetic field to generate heat, usually used in metal heat treatment and other aspects. The principle is that when thicker metals are exposed to an alternating magnetic field, an electric current is generated due to electromagnetic induction. After thicker metals generate current, the current will form a spiral flow path inside the metal. In this way, the heat generated by the current flow is absorbed by the metal itself, causing the metal to quickly heat up. High temperature resistance wires are evenly distributed in the high-temperature resistant stainless steel seamless pipe, and the gaps are densely filled with crystalline magnesium oxide powder with good thermal conductivity and insulation properties. This structure is not only advanced but also has high thermal efficiency, Moreover, the heating is uniform. When there is current passing through the high-temperature resistance wire, the heat generated diffuses to the surface of the metal tube through crystalline magnesium oxide powder, and then transfers to the heated part or air to achieve the purpose of heating.

The air electric heater is mainly used to heat the required air flow from the initial temperature to the desired air temperature, up to 850 degree . It has been widely applied in many research and production laboratories, such as aerospace, weapons industry, chemical industry, and higher education institutions. Especially suitable for automatic temperature control and high flow high temperature combined systems and accessory testing. The range of use of air electric heaters is wide: they can heat any gas, and the generated hot air is dry, non-conductive, non combustible, non explosive, non chemically corrosive, pollution-free, safe and reliable, and the heated space heats up quickly (controllable).

Www.superbheater.com